Daily 200,000 pcs Internal Combustion Brick Production Line Drying and Firing Tunnel Kiln

Loại： Automatic Clay Brick Production Lines
Raw materials: Clay, coal
Brick size: customized
Extrusion line output: 30,000 pcs/h
Baking: one tunnel for drying, one tunnel for firing
CUỘC ĐIỀU TRA E-MAIL

Chi tiết sản phẩm

Thẻ sản phẩm

Video sản phẩm

Daily 200,000 pcs Internal Combustion Brick Production Line Drying and Firing Tunnel Kiln

Brief introduction:

This production line is designed for big size brick factory in South Asia. The raw materials of bricks are clay and coal. The coal is in small lump and need to be crushed and the clay are mixed with stones and need to be purified and crushed.

The wet bricks to be shaped is in 84*84*194mm with 4 holes. The vacuum extruder extrudes 6 columns at the same time and the block cutter cut 48 pieces bricks one time. The stack robot grabs 96 pieces wet bricks one time. The brick shaping line’s output design is 30,000 pcs bricks/hour. And the brick shaping line works 8 to 10 hours per day.

For the fired bricks packing, there are manual pallet, semi-auto pallet, and fully automatic pallet. We offer semi-auto and full auto package system.

Main technical parameters:

Production line name	Internal Combustion Brick Production Line
Raw materials	Coal (small lump), clay (mixed with stone)
Wet brick size	84x84x194mm
Extrusion line output	30,000 pcs/hour
Kilns	One drying kiln, one firing kiln
Kiln width	3.6m
Kiln output	210,000 pcs/24 hours